Purchase Wireless Bluetooth Turntable Online

1. Unclip the tonearm and remove the protective foam block from underneath it.
2. Carefully remove the protective cover from the stylus
3. Look at the belt underneath the metal platter, the belt is already fitted to the platter so make sure it is not twisted.
   • If it is, the belt must be removed and refitted, or adjusted so that it is flat
4. With the belt around your finger, place the platter on the base of the turntable and line up the large hole with the spindle. Then gently loop the belt around it.
   • If the belt is fitted correctly, there should be some resistance when you rotate the platter
5. Place the turntable mat on the platter
6. Place the balance weight on the end of the tonearm by turning and pushing gently
7. Adjust the balance weight until he arm floats parallel with the turntable
8. Rotate the balance weight one full turn. This will make the tone arm balanced.
9. Adjust the tracking weight on the balance to 2.5 (this is the correct weight for the fitted stylus)
10. Adjust the anti-skate dial to 2.5
11. Plug the power cord into the socket on the back of the turntable
12. Switch on your Bluetooth speaker
13. Press the Bluetooth button once to turn it on
14. Press the Bluetooth button again to activate pairing mode
    • When the pairing light is solid, the turntable will be paired
15. Place a record on the turntable
16. Shift the dial below the anti-skate dial towards you to start the record
17. Place the stylus above the record and shift the dial away from you to lower the stylus
18. Enjoy the music!

1. Unclip the tonearm and remove the protective foam block from underneath it.
2. Carefully remove the protective cover from the stylus
3. Look at the belt underneath the metal platter, the belt is already fitted to the platter so make sure it is not twisted.
4. If it is, the belt must be removed and refitted, or adjusted so that it is flat
5. With the belt around your finger, place the platter on the base of the turntable and line up the large hole with the spindle. Then gently loop the belt around it.
6. If the belt is fitted correctly, there should be some resistance when you rotate the platter
7. Place the turntable mat on the platter
8. Place the balance weight on the end of the tonearm by turning and pushing gently
9. Adjust the balance weight until he arms floats parallel with the turntable
10. Rotate the balance weight one full turn. This will make the tone arm balanced.
11. Adjust the tracking weight on the balance to 2.5 (this is the correct weight for the fitted stylus)
12. Adjust the anti-skate dial to 2.5
13. Plug the power cord into the socket on the back of the turntable
14. Plug an RCA cable into the back of the turntable and connect it to your desired playback device
    • Alternatively, you can connect a 3.5mm (aux) cord into the “headphone” port on the front of the turntable and connect that to your desired playback device
      • Note: you cannot use both the RCA and 3.5mm (aux) port for playback simultaneously
15. Place a record on the turntable
16. Shift the dial below the anti-skate dial towards you and place the stylus above the record to start the record
17. Shift the dial away from you to lower the stylus
18. Enjoy the music!

• • The tracking weight should be set to 2.5

1. Press the Bluetooth button once to turn it on
2. Press the Bluetooth button again to activate pairing mode

• • When the pairing light goes solid, the turntable is paired with a Bluetooth device

• • Shift the dial below the “anti-skate” dial towards you

• • 14.72”x14.57"x1.97" (450 x 370 x 50mm)

• • 7.76lbs (3.52kgs)

50.8cm W 43.9cm x D 19.6

Support for both 33 and 45 RPM records, plus anti-scratch technology

Boasting premium audio quality, our Stir It Up Wireless Turntable offers an aesthetically pleasing, streamlined design with a warm, solid bamboo construction that is crafted using only Recyclable and Regrind Materials